Mac OS – Empty the Trash/Bin Fast!

This is a little known feature on Mac OS which allows you to clear the trash extremely fast compared to the normal “Empty Trash/Bin”.

For example, if you have thousands of files left by some application, or, just want to rebuild files for any application and delete the existing ones, just emptying the trash can take quite some time.

A typical example of this, in my case, would be to delete the preview files in Lightroom or ON1 Photo RAW cache which can have thousands of files.

This is far more apparent if the data is on a HDD, external or internal, rather than a SSD.

One way around this is to use the command line and delete the files and folders using the rm command. Fortunately, the trash/bin in Mac OS has an equivalent which just deletes instead of displaying the file count and its status while emptying the trash/bin.

Let’s see how this works…

How to clean your camera and lenses

Time to clean the camera or lenses or both!

One of the commonly asked questions is what should I use to clean the lenses. Most people are fine with cleaning the camera with some kind of cloth, but, are wary when it comes to lenses.

Yes, we do have the lenspen and a variety of kits around and most of those work fine. Over a time period, I have found a better solution to cleaning my gear…Camera body and lenses.

I use plain isopropyl alcohol swabs, the kind we use in the medical field for cleaning up before and after injections. For larger work, like the camera body and the outer part of the lenses, I use Zeiss lens wipes which are larger in size and have more “juice” on the wipe.

To wipe off the lens element, I use a lint-free glass polishing micro-fibre cloth rather than any simple micro-fibre cloth. Ideally, the cloth you use which not look like a towel and should be smooth. Very similar to the kind you get when you buy spectacles.

For the camera and lens body, almost any absorbent, fine micro-fibre will do. Just dab around with the cloth and try not to wipe the gear using pressure on the cloth.

Let’s see how we can clean up our camera and lens…

  1. Make sure you have the camera mount and lens rear cap ready
  2. Remove the lens from the camera and put the caps on the lens and the camera mount
  3. Let’s start with the body and use a Zeiss wipe since one wipe can do the entire camera body
  4. We use the same wipe for the lens body or another if needed
  5. Now, let’s clean the camera mount contact using a swab. The swabs are generally almost dry. Remove the cap from the camera body. Make sure the camera is pointing down (we don’t want any dust to float in) and wipe the contact area with the swab and put the cap back on
  6. The lens elements now…Front and back. Like the in earlier video for sensor cleaning, I would not advise you to use the swab on the lenses unless you can see some spots or fingerprints. A simple jet of air and, if needed, just gently wipe the elements in a circular motion using the polishing cloth. If required, then, use one swab to gently wipe the front and/or back elements, wait for a few seconds and then wipe the elements with the polishing cloth.
  7. Now, remove the cap from the camera mount. Use the blower to blow out any dust from the inside of the camera while keeping in down. Blow out the rear element of the lens and put the lens back on the camera.

Ideally, don’t even wipe the lens without using a blower on it first. There might be particles on the surface of the glass that might scratch the element while being wiped across. The same applies to the viewfinder and LCD glass.

Since we are using alcohol, it will evaporate almost instantly in the case of the swabs and in a few seconds when using the Zeiss wipes. Remember not to use excessive pressure on the swabs or wipes when using then. Since we already have alcohol on them, additional pressure will not do anything.

When I am outdoors, I prefer using the blower with either the lenspen or the polishing cloth to clean up any fingerprints or dirt that might have fallen on the front element.

Since I did not clean the contact areas, that is all that I will actually clean here…The rest is “understood” types 🙂

That’s it!


#Photography #Gear #Sensor #Nikon

How to find out if your camera sensor has dust and clean it

As a wildlife macro photographer, I have learnt the hard way that even a single dust spot on the sensor could, potentially, totally ruin a photograph.

While this is not really a major issue for non-macro photography, over some time, this can impact other genres as well.

For the last few years, I always check for sensor dust before I leave home even when I am not going for a macro session.

I have devised my own method for checking for dust and cleaning it. This is what I will demonstrate here in this video.

First, make sure you have a fully charged battery in the camera. In case we need to clean the sensor, a fully charged battery is required. Also, since this is what I do before I move out to shoot, it is always a good idea to have a fully charged battery anyway.

  1. Make sure you have a fully charged battery
  2. Put the lens you are going to use on the camera body
  3. Stop down to the minimum aperture you would use. Most lenses would stop down to around f/22 or f/32.
  4. Set the camera to manual mode, set the ISO to 100 (base ISO) and shutter speed to around 6 or 8 seconds.
  5. Make sure the camera is not focussed to the light source we will use to check for dust
  6. Release the shutter while waving the camera smoothly around the light source

Continue reading

How to get your own domain name URL on YouTube

Since I started making some videos on photography around a month back, I was looking for some options to make my YouTube channel URL more readable and usable.

I already have a couple of domains that I use for other purposes and since I could not find much on YouTube, I decided to forward a subdomain from one of my existing domains.

This is a relatively simple process and once you update that with your domain provider, it should be active within an hour or so.

The video has all the details and how to go about this process.



Cleaning up bird photos using Photoshop and ON1 Photo Raw

A friend of mine wanted to figure out how I would approach cleaning up this bird image using Lightroom and Photoshop.

Although I already had some videos on this earlier, but, this time around, I thought it might be nice to compare this relatively simple task in ON1 Photo Raw 2020 as well. After all, this is the kind of work I had purchased ON1 for.

The following video demonstrates how I would clean up the image using Lightroom and Photoshop. Ideally, I would do all the raw adjustments in Lightroom and then take the image to Photoshop.


In the following video, I try the do something similar in ON1 Photo Raw with the same image.

I think most wildlife photographers and birders would find these videos useful.

As already mentioned in an earlier video, with some bug fixes and updates, ON1 seems to be a nice package.

Capture One 20 Pro 13 vs Lightroom Classic 9 – Not really!

I was excited about the lower-priced Nikon version and went ahead to get a trial version of the full Capture One 20 Pro. Three days later, after watching quite a few of their videos while trying to import my Lightroom catalog, I gave up.

In short…This is not really meant to be a LR replacement. Like Luminar 4, you can use it as an add-on for some specific purposes, but not as a replacement.

While Capture One has some good features for raw processing that would be really welcome in LR, but, it also lacks quite a few. For example, HDR or Panorama merging, maps to geotag images and some more.

You would still land up using PS of Affinity Photo for more. Given the price of Capture One, I do not believe it is for me. The LR+PS combo beats it for features and usability.

I have around 50k images in a LR catalog and the import was chugging along even after 24 hours. I cancelled out of that. There seems to be no way to pause or continue later.

Continue reading

ON1 Photo RAW 2020.1 – Bugs and Nuances

Like I mentioned in the previous video, ON1 could well be a choice for photographers, but, there are issues that one should be aware of before shifting to ON1. I will cover some of the better features in the next video.

I use both Luminar 4 and ON1 2020.1 along with Lightroom Classic 9.2.1 for now. I still import and cull in Lightroom since that is a lot simpler and faster there. Both Luminar and ON1 use the same top-level folder and automatically update the same.

So far, I have no issues using this setup. Might also add Capture One if it comes up with a reasonable deal like with Luminar and ON1.

I have been working with and using ON1 for the last few weeks and so far, I have found the following issues…

Import Options for folder creation. When importing, the filenames for continuous shots are named as “copy xx”, so, don’t go deleting those.

Continue reading